News

Designers find better solutions with computer assistance, but sacrifice creative touch

From building software to designing cars, engineers grapple with complex design situations every day. 'Optimizing a technical system, whether it’s making it more usable or energy-efficient, is a very hard problem!' says Antti Oulasvirta, professor of electrical engineering at Aalto University and the Finnish Center for Artificial Intelligence. Designers often rely on a mix of intuition, experience and trial and error to guide them. Besides being inefficient, this process can lead to ‘design fixation’, homing in on familiar solutions while new avenues go unexplored. A ‘manual’ approach also won’t scale to larger design problems and relies a lot on individual skill.
The design space in the virtual reality task
The design space in the virtual reality task. From Figure 2 in Chan et al. (2022).
Participants in the study moved their hand to find targets in the virtual reality space.
Participants in the study moved their hand to find targets in the virtual reality space. From Figure 2 in Chan et al. (2022).

Oulasvirta and colleagues tested an alternative, computer-assisted method that uses an algorithm to search through a design space, the set of possible solutions given multi-dimensional inputs and constraints for a particular design issue. They hypothesized that a guided approach could yield better designs by scanning a broader swath of solutions and balancing out human inexperience and design fixation. 

Along with collaborators from the University of Cambridge, the researchers set out to compare the traditional and assisted approaches to design, using virtual reality as their laboratory. They employed Bayesian optimization, a machine learning technique that both explores the design space and steers towards promising solutions. ‘We put a Bayesian optimizer in the loop with a human, who would try a combination of parameters. The optimizer then suggests some other values, and they proceed in a feedback loop. This is great for designing virtual reality interaction techniques,’ explains Oulasvirta. ‘What we didn’t know until now is how the user experiences this kind of optimization-driven design approach.’

To find out, Oulasvirta’s team asked 40 novice designers to take part in their virtual reality experiment. The subjects had to find the best settings for mapping the location of their real hand holding a vibrating controller to the virtual hand seen in the headset. Half of these designers were free to follow their own instincts in the process, and the other half were given optimizer-selected designs to evaluate. Both groups had to choose three final designs that would best capture accuracy and speed in the 3D virtual reality interaction task. Finally, subjects reported how confident and satisfied they were with the experience and how in control they felt over the process and the final designs. 

The results were clear-cut: ‘Objectively, the optimizer helped designers find better solutions, but designers did not like being hand-held and commanded. It destroyed their creativity and sense of agency,’ reports Oulasvirta. The optimizer-led process allowed designers to explore more of the design space compared with the manual approach, leading to more diverse design solutions. The designers who worked with the optimizer also reported less mental demand and effort in the experiment. By contrast, this group also scored lower on expressiveness, agency and ownership, compared with the designers who did the experiment without a computer assistant.  

‘There is definitely a trade-off,’ says Oulasvirta. ‘With the optimizer, designers came up with better designs and covered a more extensive set of solutions with less effort. On the other hand, their creativity and sense of ownership of the outcomes was reduced.’ These results are instructive for the development of AI that assists humans in decision-making. Oulasvirta suggests that people need to be engaged in tasks such as assisted design so they retain a sense of control, don’t get bored, and receive more insight into how a Bayesian optimizer or other AI is actually working. ‘We’ve seen that inexperienced designers especially can benefit from an AI boost when engaging in our design experiment,’ says Oulasvirta. ‘Our goal is that optimization becomes truly interactive without compromising human agency.’

This paper was selected for an honourable mention at the ACM CHI Conference on Human Factors in Computing Systems in May 2022.  

Reference: Chan, L., Liao, Y.C., Mo, G.B., Dudley, J.J., Cheng, C.L., Kristensson, P.O. and Oulasvirta, A., 2022. Investigating Positive and Negative Qualities of Human-in-the-Loop Optimization for Designing Interaction Techniques. doi: 10.1145/3491102.3501850 

FCAI

Finnish Center for Artificial Intelligence (external link)

The Finnish Center for Artificial Intelligence FCAI is a research hub initiated by Aalto University, the University of Helsinki, and the Technical Research Centre of Finland VTT. The goal of FCAI is to develop new types of artificial intelligence that can work with humans in complex environments, and help modernize Finnish industry. FCAI is one of the national flagships of the Academy of Finland.

  • Published:
  • Updated:

Read more news

image of a wooden pillar from little finlandia and the text time out
Research & Art Published:

Aalto University shakes up construction practices at the New European Bauhaus Festival in Brussels

The exhibition Time Out! will be on show in Brussels from 9 to 13 April 2024 as part of the NEB Festival.
Two of the awardees and their robotic arm all holding colorful mugs. Aalto Open Science Award, Honorary mention.
Awards and Recognition, Research & Art Published:

Aalto Open Science Award third place awardee 2023 – Intelligent Robotics Research Group with the Robotic Manipulation of Deformable Objects project

We interviewed the Intelligent Robotics Research Group with the Robotic Manipulation of Deformable Objects project, 3rd place awardees of the first Aalto Open Science Award.
Five Aalto University students around a table
Research & Art Published:

Read the Qual+ Newsletter

We are excited to welcome you to the second Qual+ Newsletter and continue bringing you new ways of looking at methods within management studies.
Picture of leaves in water.
Press releases Published:

Graduate Sustainability Competencies and Influence in the Workplace – Aalto University's Latest Research

Aalto University's Meeri Karvinen successfully defends her doctoral dissertation, February 2024.